Industrialized Building System (IBS) | Literature Review

Industrialized Building System (IBS) | Literature Review CHAPTER 2:Â  LITERATURE REVIEW 2.1 Introduction The objectives of this chapter will identify and study into the details and provide the literature review of Industrialized Building System (IBS). In this literature review of building system will also be covered in this chapter. The contents will focus on definitions of IBS, characteristic of building in Malaysia with application of IBS, advantages of IBS and disadvantages of IBS. The 5 types of widely used IBS in Malaysia project will be study in this chapter. In addition, the comparison of suggestion method which use of IBS in different building in Malaysia will be carried out in this chapter. Besides that, the systematic solution by applying IBS in current Malaysia projects which able to reduce waste during construction project life cycle which able to create and heading toward friendly or eco environment compare to conventional method will be carried out in this chapter. 2.1.1 Definition of IBS According to Dietz (1971), in the early literature defined IBS as the whole process of all the subsystems and components make full utilized of industrial production, transport and assembly technology. The IBS system is actually apply in construction industry is mainly to reduce input and generate more output by maximize or fully utilized the production, transportation and assembly during construction stage which indirectly save up a lot of time and costs for the process of above. (Dietz 1971) Meanwhile according Warszawski (1999), IBS defined as a set of interrelated elements, to take collective action that the designated and performance of the building. In additional, IBS is defined as a process of investment in facilities, technology and equipment, to minimize the amount of labour in the site, to improve the quality of building and to increase the speed of construction. From here we noticed that not only time and cost is being save up but indeed quality also can be improve by applying IBS. (Warszawski 1999). According to Parid (1997), IBS defined as a industrialized production technology used by the system, whether in component production or assembly of building. (Parid 1997) The interpretation from Esa et al (1998), IBS as continuous use of the system, so that the manufacturing use end-user to reduce waste of resources and enhance the value of each building craftsmen. (Esa etal 1998) According to CIDB, IBS is a construction process that transferring the substantial activities from site to factory where the building components are manufacture in factory then delivery to site and assembled at site. This is the process that involve prefabricated the elements of building in factory by using machine or formwork and on-site installation. 2.1.2 Classification of IBS In early stages, Badir (1998) proposed four types in Malaysia with Badir-Razali classification. These building systems which is conventional system, cast in situ system, composite building system and the prefabricated system is shown in Figure 2.1. Each building system is composed of representatives of the respective construction methods, thus further through its construction characteristics of the technology, features and geometry. (Badir 1998) Figure 2.1 : Types of building system according to Badir-Razali classification in Malaysia (Badir 1998) IBS also can be classified according to several aspects: According to structural system According to material According to relative weight of component 2.1.3 Classification according to structural system Panel system The loads are distributes by the large floor and wall panel where the building loads is support by wall in panel system. This system is suitable for those building are required large wall and this system is not suitable to building with large span. Frame system In frame system, the building loads are support by column and beam. The walls used is required light and easy to fix and concrete panels are introduces as flooring element. Box system The box systems is include those systems that make use of three-dimensional modules or boxes for fabrication of habitable units that are able of withstanding load from various directions due to their internal stability. 2.1.4 Classification according to material Timber The prefabrication of timber consists of two types which are ready-cut plus shop fabrication of joints (column and beam) and structural panels only consists of walls and floors without column and beam. Steel All the steel elements are prefabricated in factory then only transport to site to joints by welding or bolting at site. The large proportion of the strength to the weight allows a long-span or high-rise building. Reinforced concrete Reinforced concrete has high degree of availability, durability, low material cost and fire resistance. There are two basic trends in development of reinforced concrete IBS components which are precast frame members such as columns and beams and panelised components such as walls and floors. Brick and block Brick and block for IBS are prefabricate and lay in factory then only transported to site and last erected at site. With this will ease the construction works at site. 2.1.5 Classification according to relative weight of component IBS components can be classified according to relative weight. Majzub explained that the relative weight of components should be used as a basis for building classification because the factor of weight has significant impact on the transportability of components and has influence on the production method of the components and their erection method at site. Table 1 is shown the building systems classification according to relative weight of component. (Majzub, 1977) Table 1: Classification according to relative weight of components (Majzub, 1977) 2.1.6 Types of IBS and apply to building in Malaysia Based on CIDB (2003) the classification of IBS in Malaysia is broken down into five categories, which is a precast concrete frame panel and box system, steel formwork system, steel framing system, block work system and timber frame system . IBS is a construction process that use of technology, products, components and on-site installation of building system. From the structural classification five of IBS display section, which are mainly classified according to some modifications, the main groups in Malaysia by CIDB. (CIDB 2003) 2.1.6.1 Precast Concrete Framing, Panel and box system Precast concrete components are the most common prefabricated elements in Malaysia. The precast concrete elements are the concrete product that manufactured in a controlled environment and being transported to the construction site for installation. There are precast concrete for columns, slabs, lightweight precast concrete, permanent concrete formwork, and beams. Besides that, it also consists of 3-D components such as staircases, toilet, balconies, lift chamber and etc. High degree of flexibility is one of the advantages of the system in regards of larger of larger clear span between column, resulting in wider open space and freedom of greater areas. Precast concrete wall system consisting og precast floor and load-bearing walls of building. The load-bearing walls and slabs are transfer to construction site for erected. The system is preferred simple and easy flexibility with due to the restriction of removal of load bearing will making it a lesser degree of flexibility. The carefully good coordination and design between builders and designer, the erection process is very fast, and the number of wet trade in the field can be reduced significantly. 2.1.6.2 Steel Formwork Systems This is the system formwork which is designed by manufacturer to replace a conventional timber formwork. The steel formwork is manufactured in the plant and then assembled on construction site. The steel reinforcement and service conduit will be installed on site before the steel formworks are installed. the installation is very easy by using simple support system. It can be described as a mould which the wet concrete can be poured into the mould and form the required shape, these steel formwork systems are subjected to quality control. This type of IBS method is considered as the low level in the construction industry. The steel formwork system that used in beams, permanent steel formworks, tunnel forms and column moulding forms. 2.1.6.3 Steel Framing Systems Steel is a strong rigid materials, suitable for a high degree of flexibility across the structure of long term construction and rehabilitation of the architectural details of the framework construction. The components of steel framing system are rolled into standardized sizes. The component are then manufactured which involves cutting, drilling, shot blasting, welding and painting. Steel frames are erected, welding and the tightening of bolt after they are fabricated. The steel framing systems has been a popular choice, and is widely used in fast track construction project, the system commonly used with precast concrete slab, steel columns and beams. 2.1.6.4 Prefabricated Timber Framing System In the early 1970s, single storey low cost terrace houses mostly built of pure timber frame and wood which sitting on three feet high plastered brick walls and taking advantages of simple raft foundation due to the high weight superstructure. These prefabricated timber framing systems is using the timber in the construction industry for the building. Usually the timber framing system are consists of timber building frames and timber roof trusses. Steel plate is being used during prefabrication of timber to join members of truss. All members needs to be treated with anti pest chemical. 2.1.6.5 Block Work Systems The time consuming traditional brick laying tasks are generally simplified by using block work systems. Interlocking concrete masonry units (CMU) and lightweight concrete blocks are involved in block work system. Fabricated and cured of the components take place in the plant. The elements are normally used as bricks in structures and interlocking concrete block pavement 2.1.7 Advantages of IBS for public housing There are many advantages of implementing IBS. according to CIDB (2003), compares to conventional method. Following are brief descriptions on a number of advantages where using IBS for the public housing:- Advantages Description Reduce construction time IBS will requires less construction time Because both the site work and the fabrication of element can take place concurrently work at site only the erection of IBS components. So, this leads to earlier occupation of the building. Save cost Reducing on-site workers significantly labor cost for contractors. (Wisam 2005). Minimizing cost of transferring waste materials due to quality control and reducing waste material. (Noraini 2009). Exemption of the Construction Levy for housing developers who utilize IBS components exceeding than 70%. (CIDB 2005). Provides earlier occupation of the building, thus reducing interest payment or capital outlays (Peng, 1986 cited in Mian, A.T.E, 2006). Saving in labour Because the IBS components are produced in factory and higher degree of using machine so will reduce of labour dependency of labour and cut down the cost of labour. According to Abraham Warszawski (1999), the labour savings in prefabricated elements may amount to about 80% of their conventional requirement. So, will reduced the total foreign workers need in the construction industry. Optimized use of materials Higher degree of precision and accuracy in the production can be achieve by using machine to produce IBS components and consequently reduce material wastage. So, the wastage at site will be reduced if using the IBS. High quality and better finishes Quality control is an ever-increasing requirement in all construction. Controlled environment in factor, superior material selection and high mechanized technology lead to high quality controlled products. (Din 1984). High aesthetic end products through the processes of controlled prefabrication and simplified installations has maintained and ensured the quality of work in the construction industry (CIDB-(2), 2003 cited in Mian, A.T.E, 2006). Better quality control since production in factory is under heltered environment. Better quality will reduce the maintenance expenses because prefabricated components require less repair and preventive maintenance. Construction operation less affected by weather The fabrication of IBS components will not be effected by climate changes it is done in factory and only erection of the components take place on site Faster project completion due to rapid progress under all weather construction. Flexibility Different systems may use different prefabrication construction methods. IBS will provide more flexibility in the deign of precast element. By the flexibility in Architectural design (Warszawski, 1999). Increase site safety and neatness This method neater and safer site condition can be obtain thru this method. Promote safe and systematic factory working environment as minimal workers, materials and construction waste is requires on site. (CIDB 2003). Construction process can be less thru using IBS components especially for the wet work at site. 2.1.8 Disadvantages of IBS for public Housing Although there are a lot of advantages of IBS, however there are limitations for this system to be use too. Nothing in this world is perfect, so as using IBS. disadvantages of IBS are as follows:- Disadvantages description High initial capital cost The initial capital cost of IBS is usually higher than conventional method. The initial cost is includes the casting beds, cost of constructing the factory and support machinery. This method only can be achieved when undertaking large demand for housing project. Problem of joints These methods are very sensitive to the errors and sloppy work. Water leakage between joints is often the major problem when IBS is being used. This problem is clearer in Malaysia where raining occur rapidly throughout the year. Sophisticated plants and skilled operators The prefabrication system relies heavily on sophisticated plant, when skilled operators are required to the fabrication process coordinate and maintain. The entire project would be on a stand still if any of the section breakdown. Site accessibility One of the most important factors of the implementation of IBS is the site accessibility. IBS requires sufficient site accessibility to transport IBS components from factory to the site. According to Warszawski (1999), the transportations cost of prefabricated elements from plant to their construction site, amount to 3% to 5% of their total cost for distances not exceeding 50kn to 100km. Large working area Building construction using IBS required a large working area for the tower crane, factory, storage and trailers for the IBS components. Most construction in order areas are often congested and fail to provide the area required.

Western Influence on Japan Essay -- Japan and the West, The Meiji Rest

The new Meiji Period was the starting point for Japan’s isolation from foreign countries. During the end of Edo period, Matthew C. Perry came to Japan and established the Nichi-Bei Washin Joyaku, the Japan-US Treaty of Amity and Friendship, allowing Japan to be fully open to the United States of America. Soon after, foreign officials from other countries came to Japan to make similar friendship treaties, changing Japan to be one of the global nations. From the treaty, Foreigners started to build homes and live in one of the ports opened to them, creating cultural influence on the people who had never seen foreigners. Through the opening of Japan during the Meiji Period, Westerners were able to enter and create a positive influence on Japan. With emerging Western culture, Japanese foods expanded to accommodate the use of meat to fit the preference of Japanese. New industrial technology from America and Europe provided the base of Japan’s technology, leading to today’s modern and developed country with the continuous improvement. With major changes in Japanese diet and technology from emerging Western culture, Japan gained social and economic benefits, allowing the country to be the great powerhouse it is today. During the Meiji restoration, selected members of Japanese were dispatched to the United States and Europe to learn about Western laws and cultures. Western cuisine was one of the practices they achieved throughout the tour. During the visit, what astonished the Japanese was a significant height difference compared to American and European. Japanese were typically small because the traditional Japanese food culture based on fish didn’t provide enough nutrients like meat essential for healthier physical growth. Aft... ...GING PERCEPTIONS OF BEEF IN THE MAKING OF MODERN. Rep. no. Volume V 2009. The Australian National University, 2009. Web. 23 Apr. 2012. . Onishi, Norimitsu. "Spaghetti Stir-fry and Hambagoo: Japan Looks West." Nytimes.com. The New York Times, 26 Mar. 2008. Web. . Weinstein, Andrew. "Japan's Auto Industry ." About JAMA. N.p., n.d. Web. 20 Apr. 2012. . Yamasa. "Things Japanese - "A History of Japanese Cuisine"" Yamasa.org. The Yamasa Institute. Web. 23 Apr. 2012. . Yasuo, Wakuda. "Improvement of Urban Railways." (1997): n. page. Web. 13 May. 2012. .

Morris Kent Jr. vs. the United States Essay

At the age of 14 years in 1959 he was reported to have committed several offenses on housebreakings and attempted purse snatching. He was placed under probation on his mother’s care with corresponding social services. At the age of 16 in 1961 he was reported to have committed housebreaking, stealing the house owner’s wallet, and raping her. After which he admitted committing several offenses of the same manner. The waiver Kent’s mother, a lawyer, and a case worker from the juvenile court filed a petition to consider waiving the case while he was placed at the District of Columbia Receiving Home for children for a week. The trial and verdict He was convicted to six counts on housebreaking and robbery but was acquitted on two rape counts by reason of insanity. The appeal Objections to fingerprinting proceeding, absence to notification of parents, and courts denial to the access on his social services file. Petitioner also questioned the validity of the one week detainment at the District of Columbia which if an adult is already considered unlawful. The validity of the waiver which denies the petitioner the benefits of the juvenile courts parens patriae capacity (Howell 1998). Schall vs Martin The history At the age of 14 in Dec. 13, 1977 Gregory Martin was arrested with first degree robbery, second degree assault, and criminal possession of a weapon. Martin with two others allegedly hit a youth on the head with a loaded gun. They then stole the victim’s jacket and sneakers. The procedure Martin evidenced of lack of supervision was based on possession of a loaded weapon, lateness of the hour, and false information on his address given to the police. He was detained for a total of fifteen days between the initial appearance and the completion of the fact finding. The trial and verdict Martin was found guilty on robbery and criminal possession charges. Since he was adjudicated as delinquent, he was placed on two years probation. The appeal Objections were made on the pretrial detention of juveniles implying greater abuses of law and power. Re Gault, re Winship, Mckeiver vs the State of Pennsylvania The cases Winship was a twelve year old boy in 1970 who entered into a locker and stole $112. 00 from a woman’s pocketbook. He was ordered placed in a training school for an initial period of 18 months subject to annual extensions from the basis of preponderance of the evidence. Gault was 15 years old in 1967 when taken into custody as a result of a complaint that he had made lewd telephone calls. He was ordered to perform as a juvenile delinquent until he should reach maturity at the State Industrial School. Mckeiver was charged together with a group of 11 to 15 years with various acts of misdemeanors which arose from several demonstrations protesting school assignments and a school consolidation plan. The public was excluded from the hearing for major reason that the juvenile proceeding might make the trial into a fully adversary process. Each member of the juvenile group was considered a delinquent while placing each of them under probation. Analysis and recommendations The Juvenile Justice Services Administration is responsible for the effective administration of the juvenile justice programs for delinquent and incorrigible youths which is being done in coordination with the juvenile courts. The identification of the needs of children facing delinquency leads to the invention and creation of the juvenile courts to go easy on young criminals. The rapid increased of juvenile crime and young people identified as at risk has created a furor on shocking juvenile crime statistics which resulted to a public outcry on the need for change in the management of young offenders in all of US states nationwide. This practically litigated some offenders in adult criminal courts. The argument details on young children who had committed violent crimes like assault, rape, murder and armed robbery which are often adjudicated in the same court as non violent offenders charged with shoplifting, burglary, and petty theft to drug offenses. The growing disillusionment of the therapeutic and ineffective approach of the juvenile justice system has resulted to appeals for a modification of its due process to transfer young offenders to adult courts and prisons. It has been the present society’s desire to oppose rehabilitation and effect punishment. They firmly believed that the framework of the juvenile justice system has permitted young offenders to avoid accountability which led to its nonadversarial, decriminalized process where violent offenders were never separated and categorized according to the severity of their crimes. The court subsequently measures to provide guidance and rehabilitation of the child and protection for society not to fix criminal responsibility, guilt and punishment according to their parens patriae capacity. It seems that US is now caught up with its own policy which seems to produce a rapid increase of juvenile offenders who are not amenable to rehabilitation who acts as criminals who happens to be children. The courts are now dealing on the crossroads of empowering themselves to consider amenability between children who err and those children who commits an isolated criminal offense against the mandates of the juvenile justice court system. There is a marked dependency issues within the jurisdiction of the court and for young offenders otherwise involved in the judicial system. The system which serves to pose as an integral part of the national development process to protect the young and maintain peaceful order in the system has created chaos because of its policy and practice of informal justice for issues of social control. Most common practice is the treatment of every youth who violates the law is not labeled as a juvenile delinquent unless they were officially processed through the juvenile courts and officially adjudicated. But how can they be properly processed if at the start police interventions are already placing lax policies at stake? Is it a matter of policy makers and policies implementation? Or is it a matter of family emotional and authority interconnections that created the young person as he is today? The purposes and procedures of juvenile courts have become immerse on public reactions reflecting opinions on the system. To protect the rights of the young offenders, there must be a classification on matters of the crime that was committed. It is necessary to redesign a new youth justice system before it does more public harm. Young offenders caught in the web of the existing criminal justice system shall be classified according to the severity of the crime that was committed through individualized assessment and proactive case management. There shall be a diverse menu of options where the institution shall be created solely for the young offenders. This is the day that the court will treat crime as a crime regardless of the offender’s age and the appropriate time that young offenders will hold accountability and experience the consequences of their acts. Young people who violate the law are no longer guaranteed special treatment simply because they are young but must be disciplined according to the severity of the violations they had committed on separate juvenile institutions. The separate institution is still a form of special treatment where the facilities and the education and training of the young offenders are to be thoroughly studied. Amidst the severity of the crime, young offenders will still continue to be cognitively, emotionally and socially different from adults. Therefore the separation and the creation of a unique institution for them where they shall attend training and education inside and still receive diplomas for their education continues to serve them as citizens and young offenders. There must be a mother image or model assigned to a particular group of five or six children who will monitor their personal needs and really pose as a parent to them. Screening for the recruitment of mothers on this process must be very thorough and well maintained. When we say that young people are vulnerable to negative influences, we can justify the mother or parent issue by the model parent who constantly monitors and cares for them and teaches them basic family values that may be more than what their biological parents could give largely dependent on the nature and characteristics of the model parent screening recruitment process. Why not try hiring Asians? Maybe a change of culture introduction will work for these offenders. When you are out of ideas on how to control them, we might as well try other cultures to experiment the effect. We might as well try blending policies and practices on the care management of these juvenile delinquents. There shall be no lapses over the rights of the child being tried in an adult court regardless of age on the basis of the severity of the crime because the institution to where he goes is not a mix adult one but a newly created institution that caters juvenile criminals for this matter. No fear of any adverse effect on social issues and negative adult influences because they interact with people of the same violent crimes and same age bracket. Or to modify court proceedings, since we already have classifications on the severity of offenses then it can move to create law appropriate for these juveniles who were criminally charged. However, the trials shall be done under and within the umbrella of the juvenile justice system with no act of favoritism on matters of age. So waivers on matters of jurisdiction may not pose a threat to committing mistakes on putting the child into the adult institution. The issue here is the willingness of the State to provide such juvenile penitentiary. The cost and the budget appropriations will more or less equal to the budget on their drug abuse intervention offers. But if young offenders will be criminally hold accountable for their offenses then they will absolutely stop and start to manage their baby instincts which results from baby court policies and treatment of their offenses and age. The court is not justifying the act but is more on protecting the age which contributes to these young people’s confidence in passing time making crimes and getting away with it because they are young which is very unreasonable and not applicable either in the family system more on the justice court system. The issue that serves to balance the recommendation is the factors that made this young delinquents abused their rights. Maybe there were too many rights given to them that the court cannot invade to create justice for the victims in that system anymore. They have made a perfect firewall on their policies that even them cannot manage to hack their own system to change. There shall be a modification with the justice system classification on young people’s offenses and put them right back on their tracks without getting their rights off. For once in their lives they should know the harm and damage they had done to their victims and make them pay for it in their unique form of institution. It is a matter of psychological warfare with these young people. The psychological warfare of which is already in their own advantage because of the juvenile justice system policies and practices. We love our children but we need to rear them right. Love does not only mean making them babies in treatment and in policies, they also need a little spanking when they err to understand the severity of their act. Love means caring for their needs but still punishing them when they do things that poses harm to themselves, harm to their families and harm to the society. We have to stop the notion of making them think that what they are doing is still acceptable because of the governing family policies and juvenile justice system methods of treatment and rehabilitation. It is a matter of breaking their confidence now that they were made indestructible in court because of their age. The idea is to make them realize what they have done is immaterial to age but a direct violation of love and God. The institution will serve them right because they are properly taken cared of depending on the administration. Since national policy has been taking children out of their families because they don’t trust parents to be effective anymore, which is due to their policy also, then putting then in a juvenile institution consisting of a large land, mother models, equip with schools for education and training when they err will put them in their places without taking out their right. It is a midway and the last recourse for these children. There will be no fear on part of the parents and no fear on part of the justice system. The kids now will serve their time studying and learning skills to get a life after serving their sentences. Some grave offenses will require them to work within the institution as part of the training like foundry or what Don Bosconian students are doing. If you don’t want to work and get trained 8 hours a day, then don’t commit grave offenses. Just be a youth and live how a youth is supposed to live. It is a matter now of choice for these juvenile offenders. The knowledge itself that they have an institution to go won’t make them go easy on their impulse acts and imaginations. It is like the idea of over feeding the child which makes him obese, overprotective policy will make him a criminal because nobody can touch him. It seems that the idea lies on the thought that the victim will fear more of being killed and raped by a juvenile offender because no justice can be absolutely derived from it. How can a nation maintain peace and order then when it disrupts respect for law and of the rights of the victim in the first place? We want to see the situation objectively. Reversing orders by judges is just not applicable but modifications on the juvenile justice system are what we have to look into deeply. It is time for a change and that change shall start now before certain events will turn to future abolition of the ineffective juvenile justice system. We just have to look at the flow chart and analyze the policies and procedures involved in each processes. The theme is objective analysis and not favors. The only thing that will hold them from waivers and transfers to adult courts are the negative consequences of adult institutions for their age and shall not be based on their ages. Figure 1. Juvenile justice flow chart (Arizona 2006) References Arizona Supreme Court. (2006). Juvenile justice flow chart. Retrieved May 19, 2007 Website: http://www. supreme. state. az. us/jjsd/jolts/FlowChart. htm Howell, J. C. (1998, January). NCCD’s Survey of Juvenile Detention and Correctional Facilities. Crime & Delinquency. Retrieved May 19, 2007 Website: http://law. jrank. org/pages/12936/Kent-v-United-States. html

Unilever Nepal Financial Analysis - 7333 Words

------------------------------------------------- Table of Contents CHAPTER: ONE INTRODUCTION OF THE PROJECT†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.1-4 CHAPTER: TWO INTRODUCTION OF THE ORGANIZATION†¦Ã¢â‚¬ ¦..†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦5-9 CHAPTER: THREE CAPITAL STRUCTURE ANALYSIS†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.10-15 Fixed Assets†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.10-12 Inventories†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦12-15 CHAPTER: FOUR ANALYSIS OF ASSETS†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦..16-18 CHAPTER: FIVE CASH FLOW ANALYSIS†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦..†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦19-26 CHAPTER: SI X FINANCIAL RATIO ANALYSIS†¦...............................27-28 CHAPTER: SEVEN SUMMARY AND CONCLUSION†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ CHAPTER: ONE INTRODUCTION OF THE PROJECT Theory is just limited to knowledge, but practical approach gives the platform for applicability.†¦show more content†¦Unilever have also invested significantly in the distribution area with an ability to reach its consumer both directly and indirectly. Unilever have also shown strong focus on people development and over a period of time trained and staffed a well empowered team. Unilever is also strongly committed in the social wellbeing and has been in the forefront of CSR activities. Business Type | Manufacturer | Main Products | Lux, close up, pepsodent | Number of Employees | 101 - 200 People | Internet address of the company: Unilever is a multinational company. Though, being a multinational company and operating in many nations worldwide, the company doesn’t have website specifically for Nepal. The common internet address of the company for all host countries is www.unilever.com , the main server being in parent company. The companies industry: Unilever Nepal products include cleaning agents and personal care products. Some of the Personal care products of Unilever are * Ponds * Pepsodent * Lifeboy * Lux * Liril * Close up * Clinic plus * Fair and lovely * Sunsilk * Pantene * Axe * Dove * Pears Some of the cleaning agent products of Unilever Nepal are * Wheel Ok * Wheel Shakti * Surf * Vim Stock Exchange (Market): Being a listed company in NEPSE, Unilever stock trades at Nepal Stock Exchange Ltd. (www.nepalstock.com) TickerShow MoreRelatedUnilever Nepal Limited7333 Words   |  30 PagesPROJECT†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.1-4 CHAPTER: TWO INTRODUCTION OF THE ORGANIZATION†¦Ã¢â‚¬ ¦..†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦5-9 CHAPTER: THREE CAPITAL STRUCTURE ANALYSIS†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.10-15 Fixed Assets†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.10-12 Inventories†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦12-15 CHAPTER: FOUR ANALYSIS OF ASSETS†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦..16-18 CHAPTER: FIVE CASH FLOW ANALYSIS†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦..†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦19-26 CHAPTER: SIX FINANCIAL RATIO ANALYSIS†¦...............................27-28 CHAPTER: SEVEN SUMMARY AND CONCLUSION†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ CHAPTER: ONE INTRODUCTIONRead MoreRatio Analysis Fmcg5318 Words   |  22 PagesFMCG sector in India has market size in excess of US$ 13.1 billion as of the year 2012. The FMCG sector in India had a growth rate of 15% in the year 2011. FMCG companies in India The following is a list of FMCG companies in India: †¢ Hindustan Unilever Ltd. †¢ ITC Limited †¢ Britannia Industries Ltd. †¢ Marico Industries Ltd. †¢ Nestlà © India †¢ Godrej Group †¢ Tata Global Beverages †¢ Parle Agro †¢ Nirma †¢ Bovonto †¢ Cavin Kare †¢ Grove limited †¢ Wipro †¢ GCMMF (AMUL) †¢ Reckitt Benckiser †¢Read MoreThesis on Capital Structure26836 Words   |  108 PagesCAPITAL STRUCTURE MANAGEMENT IN NEPAL (A CASE STUDY ON NABIL, NIBL, NEA, NTC HGICL) Table of Contents: Recommendation I Viva- Voce Sheet II Declaration III Acknowledgement IV List of Figures V List of Tables VI Abbreviation VII CHAPTER I. INTRODUCTION Pg No. 1. Background of the study Read MoreThesis on Capital Structure26846 Words   |  108 PagesCAPITAL STRUCTURE MANAGEMENT IN NEPAL (A CASE STUDY ON NABIL, NIBL, NEA, NTC HGICL) Table of Contents: Recommendation I Viva- Voce Sheet II Declaration III Acknowledgement IV List of Figures V List of Tables VI Abbreviation VII CHAPTER I. INTRODUCTION Pg No. 1. Background of the study 1 2Read MoreStp Analysis of Unilever7427 Words   |  30 PagesPositioning of Sunsilk | 5-8 | 4. | Advertisement Analysis of Sunsilk | 9-10 | 5. | Competitor Analysis of Sunsilk | 11-12 | 6. | Market Segmentation, Target Market and Positioning of Taaza | 13-14 | 7. | Advertisement Analysis of Taaza | 15-16 | 8. | Competitor Analysis of Taaza | 17-18 | 9. | Market Segmentation, Target Market and Positioning of Fair amp; Lovely | 19-20 | 10. | Advertisement Analysis of Fair amp; Lovely | 21-23 | 11. | Competitor Analysis Fair amp; Lovely | 24 | 12. | Market SegmentationRead MoreWhat is Corporate Social Responsibility?5030 Words   |  21 Pagesrural consumption and growing competition for scarce resources demands that we embrace a new collaborative model of development for agricultural practices. Therefore the key drivers of this model would be Access to Urban India, Technology Adoption, Financial Inclusion, Education amp; Health, and Skill Building. First of all coming to access to urban services, we could say that it had led to significantly higher level of knowledge and new sources of livelihood in villages located in 19 R-Urban (Rural-Urban)Read MoreComparative Study of Noodles Brand in India2208 Words   |  9 PagesA Project Report On Comparative Analysis of competing brands Subject: Product and Brand Management College: T. N. Rao College of Management Studies The year 2010 saw a sudden spurt in this instant noodles category with two major FMCG players, GSK and ITC venturing in. Besides, existing competitors are also trying for a rebound. Circa 1982. All it took was two minutes to woo the hungry souls. The country had just been introduced to a revolutionary product, which took over hundredsRead MoreIntroduction to Fmcg Industry8866 Words   |  36 Pagesto Rayette-Fabergà © Inc., and, in 1971, the company name was changed back to Fabergà © Inc. However, in January 2007 Unilever sold its entire global portfolio of trademarks, licences and associated rights relating to the Fabergà © brand. The new owner is Cayman Islands-based Fabergà © Limited, which is advised by Pallinghurst Resources LLP, an investment advisory firm based in London. Unilever was to remove the Fabergà © name from all its products and packaging by the end of 2007. http://en.wikipedia.org/wiki/Faberg%C3%A9_(cosmetics)Read MoreProject Report on Dabur Company7854 Words   |  32 PagesSUMMER PROJECT REPORT ON FINANCIAL MODELING OF DABUR Under the guidance of Mr.DheerajVaidya, Director Corporate Bridge Consultancy Pvt. Ltd. In partial fulfilment of the requirements For the award of MASTER IN MANAGEMENT STUDIES(MMS) (Affiliated to university of Mumbai) VIVEKANAND EDUCATION SOCIETY’S INSTITUTE OF STUDIES AND RESEARCH CHEMBUR, MUMBAI Submitted by Sumit B. Agrawal ROLL NO: 01 MMS 2012-2014 Declaration By Candidate I wish to state that the work embodiedRead MoreProject – Organization Dynamics11615 Words   |  47 PagesMARKETING STRATERY Marketing strategy is a process that can allow an organization to concentrate its limited resources on the greatest opportunities to increase sales and achieve a sustainable competitive advantage. Marketing strategy consists of the analysis, strategy development, and implementation activities in: â€Å"Developing a vision about the market(s) of interest to the organization, selecting market target strategies, setting objectives, and developing, implementing, and managing the marketing program